User's Manual

SE-1200 Pro&SE-1201 Pro Electrocardiograph User Manual System Setup
- 47 -
Detection Rate
Maximum Signal
Range
Choose from: ±5 mV, ±10 mV, ±20 mV.
9.7 User Setting
You have to enter a password before configuring the user setting.
Item
Description
User Login
Choose from: On, Off.
User login is selected by default.
Add User
Please enter the user’s real name, define their user name and
password for login to SE-1200 Pro&SE-1201 Pro ECG. The user
can also be given the authority to diagnose by ticking the check box
before the diagnostic power.
Modify User
Modify user name and (or) password. Select a user from the user
list for modification. You can also update user information by
tapping Sync.
9.8 Others
Item
Description
DEMO Mode
Choose from: Off, Normal ECGs, Abnormal ECGs.
Patient information can neither be deleted nor retrieved from the
server when enabled. ECG data acquired is not stored.
You need to enter the password “006363” to open the DEMO
mode.
Hospital Name
Enter up to 90 English letters to define the hospital name. This
name will appear in the title of the ECG report. File formats such as
PDF, JPG, BMP, PNG, and TIFF are supported.
Administrator
Password
Define the password required to access System Setting, the
Patient tab (if selected), and the ECG File tab (if selected). Blank
by default. Enter up to 13 letters or numbers or a combination of
them to define the password.
Restore default
factory settings
Clears the current settings and returns to the default. You need to
enter the password to configure this setting.