User's Manual

SE-1200 Pro&SE-1201 Pro Electrocardiograph User Manual System Setup
- 45 -
Auto Upload
Choose from: On, Off.
When On, the system will automatically transmit ECG files to the
server when the recording finishes.
Delete file
after uploading
Choose from: On, Off.
When On, the system will automatically delete ECG files from local
memory when the files are automatically or manually transmitted to
the server.
Time
Synchronization
Choose from: On, Off.
When “On”, the system will send a synchronization request to the
server, and the electrocardiograph retrieves orders from the server
simultaneously. And the time sent by the server is taken as the
current system time.
Encrypted
Transmission
Choose from: On, Off.
When On, the system will use encryption protocol during ECG
transmission. SFTP and SSL protocols will be employed for such
transmission. Don't hesitate to contact the manufacturer if you need
to import another certificate for encrypted transmission.
MAC Address
View the MAC address of the device.
Server Setting
Order Server: set the address and port number of the server that
provides orders for the system. The port number allows a maximum
of five numbers for entry.
FTP or SFTP Server: set the address, port No., user name, and
server password that receives ECG files from the system. The
communication port allows a maximum of five numbers for entry.
Connection test: checks if the server is connected.
NOTE:
For information on how to configure the network, consult your
network administrator.
Transmission
Commitment
Choose from: On, Off.
When On, the server will respond whether it has received ECG files
or not to the system in each upload. This option is at the bottom of
the server setting mentioned above.
9.6 Parameter Setting