User's Manual

SE-1200 Pro&SE-1201 Pro Electrocardiograph User Manual Editing ECG
- 35 -
For calculation of QTc, select System Setting > Parameter
Setting > QTc Formulas. The default formula is Bazett. You
can change the formula, but this takes effect only for the
ECG analysis done after this change.
P/QRS/T (°)
The axis of the P wave, QRS complex, and T wave in the
frontal plane
RV5/SV1
(mV)
The amplitude of the R wave of V5 lead/the amplitude of the
S wave of V1 lead
RV5+SV1
(mV)
The amplitude of the R wave of V5 lead plus the amplitude
of the S wave of V1 lead
RV6/SV2
(mV)
The amplitude of the R wave of V6 lead/ Amplitude of the S
wave of V2 lead
It is visible only when enabled.
RR/PP
RR interval / PP interval
It is visible only when enabled.
6.6 Modifying Diagnosis
Editing Diagnosis
To edit auto diagnosis:
1. Tap on the auto diagnosis portion. The Auto Diagnosis window opens.
2. Select the diagnostic statement you want from the list, or manually enter
comments in the textbox. The list allows you to add or delete diagnostic messages.
3. When you exit the analysis screen, select whether to save your modification or
not. You can also upload the diagnosis to the server by tapping “Submit Diagnosis” in the
upper right corner.
6.7 Re-analysis
Tap Re-analyze. The 10s ECG waveforms from the present onset will be re-analyzed.
Auto measurements and diagnosis will be automatically updated.
6.8 Averages View
SE-1200 Pro&SE-1201 Pro ECG provides a Template (averaged complexes) to analyze
ECG waveforms. To open Template, tap on the icon (three vertical dots) at the right
lower corner of the Analysis screen—select Template from the pop-up menu. The