User's Manual

SE-1200 Pro&SE-1201 Pro Electrocardiograph User Manual Editing ECG
- 34 -
Zoom in on an ECG
To zoom in on the waveform, press and hold the waveform of a lead. The ECG waveform
can be magnified up to 5 times by tapping ○+. To exit magnification, tap on the X in the
upper left corner.
Manual Measurement
To measure the ECG waveform, open the waveform magnification page. Tap on the ruler
in the right lower corner. A measurement pane will be displayed. Tap on the ruler once
more to exit the measurement.
To move the four-pane lines, tap on them and use the arrow keys. Move up and down to
measure the amplitude (in MV) and left and right to measure the interval (inms).
Amplitude, interval, and heart rate are synchronous with line movement.
6.3 Auto Measurement
SE-1200 Pro&SE-1201 Pro ECG provides auto measurements of HR, P wave duration,
PR interval, QRS complex duration, QT/QTc, frontal P/QRS/T axis, RV5/SV1, and
RV6/SV2 on the ECG Analysis screen. Any measurement out of the specified range will
be displayed in red.
6.4 Auto Diagnosis
SE-1200 Pro&SE-1201 Pro ECG provides an auto diagnosis of the ECG in the Analysis
screen. Slide the diagnosis portion up and down to see all. If serious diseases are
diagnosed, they will be displayed in red.
6.5 Modifying Measurement Parameters
To edit auto measurements, tap on it. The Modify Measurements window opens. Enter
the values, and tap OK to save your modifications. The measures will be automatically
updated.
The measuring parameters are listed below.
Parameter
Description
HR (bpm)
Heart Rate
P (ms)
P wave duration
PR (ms)
P-R interval
QRS (ms)
QRS complex duration
QT/QTc (ms)
Q-T interval / Normalized QT interval