User's Manual

SE-1200 Pro&SE-1201 Pro Electrocardiograph User Manual Basic Operation Guidance
- 25 -
Start or stop ECG recording.
NOTE: SE-1200 Pro&SE-1201Pro can record up to
1,800-second ECGs.
Re-acquire ECGs.
Auto
Recording mode, including Auto and Manual. Tap on it to
toggle between the two modes.
In the Auto mode, the system will acquire ECGs at the set
time and then print a report. If the user stops recording before
the time, the system will print the last 10s of ECG.
The system will not stop recording or printing ECGs until you
tap the stop button in the Manual mode.
This icon provides eight setting options. Tap the icon again to
hide these options.
Gain.
Options are: 1.25 mm/mV, 2.5 mm/mV, 5 mm/mV, 10 mm/mV,
10/5mm/mV and 20 mm/mV. The default gain is 10mm/mV.
Filter. Options are: 25 Hz, 35 Hz, 45 Hz, 75 Hz, 100 Hz, 150
Hz, 270 Hz, 300 Hz, and 350 Hz. The default filter is 100Hz.
Speed. Options are: 5 mm/s, 12.5 mm/s, 25 mm/s, and 50
mm/s. The default speed is 25mm/s.
12 lead (Standard or Cabrera).
Record rhythm ECGs. Swipe the screen left or right to toggle
between single-lead and three-lead rhythm strips.