User's Manual

SE-1200 Pro&SE-1201 Pro Electrocardiograph User Manual Basic Operation Guidance
- 23 -
4. Paper feed. When you print an ECG report, if Paper Marker is set to On, the
electrocardiograph can identify the black markers and stop at the crease of the
paper for the convenience of tearing.
NOTE:
1. When the folded thermal paper is used, the paper roller is unnecessary and must
be taken out.
2. The two moving parts should be removed when using paper of 215mm in width.
3. The exit edge can help you tear the recorder paper.
4. If the paper with black markers is used, make sure that the markers are on the
bottom of the paper.
CAUTION
Ensure that the recorder paper is installed in the center of the recorder. The paper
edge is parallel with the casing edge in the direction of the advancing paper to
avoid paper deviation or damage to the paper edge.