Product Information

SA Series Ambulatory Blood Pressure Monitor User Manual Introduction
- 13 -
2.2 ABP Monitor at a Glance
1
/
OLED screen
Displaying time, automatic or manual BP
readings.
2
/
Hose
connection
To connect the extension hose from the cuff to
monitor for an ambulatory BP study.
3
Start/Stop
button
To start a programmed ABP study: when
24-hour time is displayed, press this button to
take first reading.
To abort a measurement: press this button any
time during a reading.
To start a manual BP reading: Press this button
before/after an auto reading.
To mark an event:
Press and hold this button for 3 seconds when
not reading.
4
On/Off
button
To power on, when the montior is properly
loaded with batteries, the monitor will be
automatically powered on. If the display is not
illuminated, press the On/Off button.
To power off, when not taking a reading, press
and hold the button till the display turns off,
then release.
5
Type-C
interface
To connect the monitor to a PC by a USB cable
for the purpose of monitor programming and
BP data transmission.
6
/
Battery
compartment
To place two AA batteries for power supply.
1
4
3
5
2
6