User's Manual

Acclarix LX9 Series Diagnostic Ultrasound System User Manual Measurements and Reports
- 112 -
8.1.3. Strip Doppler Generic Measurements
The generic measurements supported in strip Doppler mode are listed in the table below.
No.
Measurement
Group
Measurement Item
Remark
1.
Generic
PS
ED
RI
PI
PS,ED,RI,S/D
Time
HR
Manual Trace
Auto Trace
Spline Trace
2.
Generic
Velocity
Only available for Cardiac
exam
Manual Trace
Spline Trace
HR
Time
PGMax
PGMean
3.
Vessel
Vol Flow
Auto Trace method
4.
Tei index
COT
Only available for Cardiac
exam
ET
8.1.3.1. Velocity
Multiple types of velocity measurements are supported on Doppler Strip, for example velocity at any
point, at PS or ED.
Velocity: measures the velocity at any point on the strip, and calculates PG.
1. Invoke the generic measurement function.
2. Select Generic-> Velocity.
3. Move the caliper to the desired point on the strip.
4. Press the <Set> key to fix the point, and then Velocity and PG results display.