User's Manual

Acclarix LX3 Series Diagnostic Ultrasound System User Manual Imaging
- 57 -
Single, Dual,
Quad
These three radio buttons switch the display to show 1, 2, or
4 images at once. Single shows the 3D image, dual shows
the A slice and 3D image, Quad shows three MPR slices and
3D image.
VOI
Press to activate the function of adjusting VOI or clip plane.
Use the trackball to adjust and press <Set> to switch
between VOI and clip plane.
Cut
This is a folder of cut functions with various cut tools inside.
See below for details.
Cut tools
These are two radio buttons. The region inside or outside the
trace will be cut. To draw the trace, move the trackball and
press <Set> to locate the start point, use trackball to draw
trace and second press <Set> to locate the end point.
These are two radio buttons. The region inside or outside the
box will be cut. To draw the box, move the trackball and
press <Set> to locate the top left point, move the trackball
and a box is displayed. Press <Set> to locate the lower right
point of the box.
These two radio buttons switch the size of the eraser. To use
eraser to cut, move the trackball and press <Set> to locate
the first point, move the trackball and the path that the eraser
moves is cut, and then press <Set> to complete the cut.
Undo Undo the previous cut operation
Redo Redo the previous undo operation
Undo All Return to the condition before cutting
Render
This is a folder containing various render modes inside.
Render modes of Surface and Max. are available.
Surface: helpful for surface imaging, for example, fetus face,
hand or foot.
Max: displays the maximum intensity of gray values in the
VOI. This is helpful for viewing bony structures.
Threshold Adjust the threshold of 3D image.