User's Manual

Acclarix LX3 Series Diagnostic Ultrasound System User Manual Imaging

- 55 -

Surface/

Skeleton

These two radio buttons determine if the acquisition is

optimized for looking at Skeleton or Surface.

Press to switch to Pre-3D.

Press to switch to Pre-4D.

Start

Start an acquisition.

Table 5-7 Pre-3D Touch Screen

5.8.2. 3D Volume Sweeping

Select Skeleton or Surface on the Pre-3D touch screen and press Start button or <Update> key to

start image acquisition.

During the process of 3D volume sweeping, the images swept in VOI box are displayed in the image

area.

Figure 5-2 3D Image Scanning

While scanning, the sector in the right bottom is filled gradually, and no buttons on the control

panel and touch screen can be activated.

5.8.3. 3D Image Review

The system will enter to the 3D review status after finishing one sweep.