User's Manual

Acclarix LX3 Series Diagnostic Ultrasound System User Manual Getting Started
- 29 -
5. To fix the battery, move the battery holder to the middle position (see the figure below).
6. Close the battery door and secure it.
WARNING
1. When the battery capacity is ≤20%, the battery status icon turns red.
2. When the battery capacity is ≤10%, the system displays a prompt “Low Battery. The system will
shutdown in 3 mins. Please plug in the power supply immediately."
To remove the battery:
1. Turn off and unplug the system.
2. Find the battery compartment, located at the lower right side of the system(see figure 3-1) .
3. Unscrew the two screws on the battery door, and open the battery compartment.
4. Move the battery holder (see the figure below) up or down, and remove two batteries respectively.