User's Manual

Telemetry Transmitter User Manual Patient Management
5.3 Switching Patient sector
 For a disconnected patient sector (refer to Section 2.5.2.2 Patient Sectors), click anywhere in
it and choose a patient to be assigned to this section from the patient list.
 For a patient sector which is either improper offline or networked (refer to Section 2.5.2.2
Patient Sectors), select Show from the list on the patient sector (refer to Sector 6.3 Menu in
the Patient Sector), and choose another telemetry transmitter from the patient list; the chosen
telemetry transmitter will be displayed in this patient sector.
5.4 Discharging a Patient
When the monitoring on a patient is completed, you need to discharge this patient by any of the
following methods:
 Choose Discharge from the menu in the patient sector (refer to Section 6.3 Menu in the
Patient Sector).
 Choose Patient Mgmt > Discharge on the auxiliary screen.
 Discharge the patient via the Review window. Refer to Section 9.1.1 Patient Review.
The operation of discharging a patient will cause the patient offline from the MFM-CMS, and
there will be no patient admitted in the related patient sector. The discharged patient will be
shown in the history patient list. Refer to Section 9.1.2 History Patient Review.
5.5 Transferring a Patient
Select Patient Mgmt >Transfer on the auxiliary screen, and you will see a list of online patients.
From this list, select a patient whose bed will be considered as the destination bed and click OK,
and then the current patient will be transferred to the destination bed.
NOTE:
Transferring a patient to the destination bed will at the same time discharge the selected
patient on the destination bed.
5.6 Monitoring Statistics
The monitoring statistics of the selected patients will be shown in the patient management
window. The monitoring statistics covers the total monitoring time for waveforms and trends, the
number of alarm events.
Click Analysis, the system will:
 Analyze the number of high and low limit alarms for each physiological parameter and
analyze the percentage of the limit alarms of the parameter in all limit alarms.
 Analyze the number of arrhythmia events for each type of arrhythmia and analyze the
percentage of a certain type of arrhythmia.
 Analyze the average value, maximum/minimum value, and measure time of the
maximum/minimum value for the trend values.
- 35 -