User's Manual

Telemetry Transmitter User Manual Overview
60
99 36.5 40
xx xx xx xx xx xx xx xx
60
99 36
.
5 40
xx xx xx xx xx xx xx xx
60
99 36.5 40
xx xx xx xx xx xx xx xx
60
99 36.5 40
xx xx xx xx xx xx xx xx
60
99
36
.5 40
xx xx xx xx xx xx
xx
xx
60
99 36.5 40
xx
xx xx xx xx xx xx xx
60
99 36.5 40
xx
xx
xx xx xx xx xx xx
60
99 36.5 40
xx xx
xx
xx xx xx xx xx
Figure
2-14 Viewing All Patient Sectors in Large Font Display Mode
2.5.5 Layout of Patient Sectors
The number of patients you can view on the screen and the size of each patient sector depend on
the layout of the patient sectors. If 64 telemetry transmitters are connected to the MFM-CMS and
the number of patient sectors displayed on the main screen is set to 32, the screen will only
display 32 patient sectors and the other 32 sectors are invisible. You may:
 Switch between the visible and invisible patient sectors (refer to Section 5.3 Switching
Patient sector).
 Click bed number to view the 64 patient sectors in the networked state window (refer to
Section 2.5.2.3 Quick Control Area).
Refer to Section 10.1.2 Display Setup for more information about setting the layout of the patient
sectors.
- 23 -