User's Manual

Telemetry Transmitter User Manual Overview
 Click to open the drop-down list in which you can set the tags to show/hide.
 Click to exit the auxiliary screen and enter the main screen.
 Drag a tag to adjust its location.
 Click or to switch between full screen display mode and half screen display
mode for the auxiliary screen when using a single display.
2.5.4 Large Font Display
Choose Display the window in large font from the menu in the patient sector (refer to Section
6.3 Menu in the Patient Sector), and this sector will be displayed in the large font display mode
shown as Figure 2-13. Choose Display the window in large font again, and the sector will be
displayed in the general display mode. In the large font display mode, parameter values are
displayed in the patient sector, but no waveform is shown.
xxx
xxx
xx xx xx xx
60
99
xxx
xxx
xx xx xx xx
60
99
xxx
xxx
xx xx xx xx
60
99
xxx
xxx
xx
xx xx xx
60
99
xxx
xxx
xx xx xx xx
60
99
xxx
xxx
xx xx xx xx
60
99
2
3
1
4
5
6
7
8
xxx
xxx
xx xx xx xx
60
99
60
99 36
.5 40
xx xx xx xx xx xx xx xx
Figure
2-13 Viewing One Patient Sector in Large Font Display Mode
1: Large font display mode 2-8: General Display Mode
Choose Display all windows in large font from the menu in the patient sector, and all sectors
will be displayed in the large font display mode shown as Figure 2-14 Choose Display all
windows in large font again, and all sectors will be displayed in the general display mode.
- 22 -