User's Manual

Telemetry Transmitter User Manual Overview
2.5 Display Screens of the MFM-CMS
2.5.1 Overview
The MFM-CMS can display the monitoring data using a single display or using dual displays.
The main screen and the auxiliary screen are the main operation screens. The main screen and
auxiliary screen on a single display are different from those on dual displays.
The patient sectors can be displayed in two modes: the general display mode with waveforms and
physiological parameter values displaying on the screen and the large font display mode with
only parameter values displaying on the screen. The number of patient sectors which you can
simultaneously view on the main screen and the size of the patient sectors are depended on the
layout of the patient sectors.
2.5.2 Main Screen
If a single display is used, the MFM-CMS system will enter the main screen for the single display
(shown as Figure 8) after the system starts up. If dual displays are used, it will enter the main
screen for dual displays (shown as Figure 9).
xx
x
xx
x
xx xx xx xx
60
99
xx
x
xx
x
xx
xx xx
xx
60
99
xx
x
xx
x
xx xx xx xx
60
99
xx
x
xx
x
xx
xx xx xx
60
99
xx
x
xx
x
xx xx xx xx
60
99
xx
x
xx
x
xx
xx xx
xx
60
99
xx
x
xx
x
xx xx
xx xx
60
99
1
3
2
xxxx
Figure
2-8 Main Screen on a Single Display
1: System information area 2: Patient sectors 3: Quick control area
- 17 -