User's Manual

Telemetry Transmitter User Manual Overview
Terms explanation
 Main Interface, Default Interface and Setting Interface: refer to 2.2 Display Screen of
Telemetry Transmitter.
 Control focus: means the position cursor chosen by shifting key.
 Focus acceptance: means user accept the position where the control focus is. It is triggered
by function acceptance key.
1 Power supply switch
 Under telemetry transmitter off:
Keep pressing at least for 2 seconds to turn on and the green light on power
supply switch will occur.
 Under telemetry transmitter on:
When power is in 0 level or screen is ope
n, keep pressing at least for 3
seconds to turn off.
 When screen is open, press it to close screen.
Under telemetry transmitter on, when screen is closed with non-0-level of
battery, press is to open screen. (If screen is closed with 0 level of battery,
pressing it cannot open screen, and the screen will keep closed till shutdown).
2 Shifting
 In main interface, press it to display between Value - Waveform Main Interface
and Trend Graph Main Interface.
 In setting interface, press it to switch control focus.
 When input password or choose language: ① press shifting to switch control
focus; ② press function acceptance to accept focus; ③
press shifting to
choose password or language.
 In ECG leads connection sketch interface (refer to 4.1.2 Switching On), press
it to make the sketch disappear.
- 13 -