User's Manual

Telemetry Transmitter User Manual Intended Use and Safety Guidance
45 SHOCK HAZARD - Don't connect non-medical electrical equipment, which has been
supplied as a part of the system, directly to the wall outlet when the non-medical
equipment is intended to be supplied by a multiple portable socket-outlet with an
isolation transformer.
46 The telemetry transmitter is intended for use by trained healthcare professionals in
hospital environments.
47 SHOCK HAZARD - Don't connect electrical equipment, which has not been supplied
as a part of the system, to the multiple portable socket-outlet supplying the system.
CAUTION
1 Electromagnetic Interference - Ensure that the environment in which the system is
installed is not subject to any sources of strong electromagnetic interference, such as
radio transmitters, mobile telephones, etc.
2 Keep the environment clean. Avoid vibration. Keep it far away from corrosive
medicine, dust area, high temperature and humid environment.
3 Do not immerse transducers in liquid. When using solutions, use sterile wipes to avoid
pouring fluids directly on the transducer.
4 Do not sterilize telemetry transmitter or any accessories.
5 The device and reusable accessories could be sent back to the manufacturer for
recycling or proper disposal after their useful lives.
6 Remove a battery from the telemetry transmitter immediately if battery life cycle has
expired or it is not used for a long time.
7 Disposable devices are intended for single use only. They should not be reused as
performance could degrade or contamination could occur.
8 Avoid liquid splash on the device.
9 To ensure patient safety, use only parts and accessories manufactured or
recommended by EDAN.
10 Before connecting the system to the AC power, make sure the voltage and the power
frequency are consistent with the requirements indicated on the device label or in this
user manual.
11 Protect the device against mechanical damage resulting from gravitation, collision,
powerful vibration and so on.
12 Do not touch the touch screen with a sharp object.
13 A drafty environment for system installation is required.
NOTE：
- 5 -