Use Instructions

iSE Series Electrocardiograph User Manual Technical Specifications
Relative Humidity:
15%RH~95%RH
Non-Condensing
15%RH~95%RH
Non-Condensing
Atmospheric
Pressure:
70 kPa ~106 kPa 70 kPa ~106 kPa
A1.3 Physical Specifications
No handle or thermal printer: 270mm(L)×170mm(W)×28mm(H),
±2mm
Dimensions
With handle: 270mm(L)×230mm(W)×52mm(H), ±2mm
With thermal printer: 274mm(L)×274mm(W)×90mm(H), ±2mm
1.2 kg±0.3 kg (excluding thermal printer, handle, and printer paper)
1.4 kg±0.3 kg (with handle, excluding thermal printer and printer
Weight paper)
2.3 kg±0.3 kg (with thermal printer, excluding handle and printer
paper)
Display About 10.1" LCD full-touch screen, at a resolution of 1920×1200
A1.4 Power Supply Specifications
Operating Voltage = 100 V-240 V~
Operating Frequency = 50 Hz / 60 Hz
Mains Supply
Power Adapter: Output Voltage = 19 V, Output Current = 2.53 A
Input current=1.1 A
Rated Voltage / Typical Capacity = 15.2 V / 3550 mAh
Li-ion Battery
When the battery is fully charged, iSE can work (without printing)
continuously at least 8 hours.
100% recharge time: ≤ 5 hours
90% recharge time: < 4 hours
Cycle life 500 times
A1.5 Performance Specifications
HR Recognition
- 69 -