Use Instructions

iSE Series Electrocardiograph User Manual System Message
Chapter 11 System Message
System messages and the corresponding causes are listed below.
Table 11-1 System messages and causes
System Message Causes
Electrodes fall off the patient or the lead
Lead off: wires are disconnected to the ECG
sampling box.
Network unavailable! 4G, WIFI, and Ethernet are off.
Network connection timeout! Please
The network signal is poor and network
check the network. connection is failed.
Order server connection failed! IP address is wrong or the server is off.
FTP connection failed! IP address is wrong or the server is off.
Are you sure to stop sampling? Tap during the acquisition of ECG data.
Overload
The direct current offset voltage on an
electrode is too high.
- 57 -