Use Instructions

iSE Series Electrocardiograph User Manual System Setting
In DICOM (Encapsulated PDF) files and DICOM (ECG Waveform)
files, the value of QTc is always calculated by the Bazzet formula.
Choose from: On, Off.
External storage
is forbidden
Report Format Choose from:
Pediatric mode: 3x3, 6+3
, 9x1
12-lead: 3x4+1R, 6x2+1R
, 12x1.
15-lead: 3x5+1R, 6+9, 15x1
18-lead: 6x3+1R
, 18x1
NOTE:
In the case of external printer, only the default report formats are
available.
Choose from: Sequential
, Simultaneous.
Recording
Sequence “Simultaneous” prints ECG data that was captured simultaneously
for all lead groups. “Sequential” prints ECG data that was captured
at sequential intervals for each lead group in turn.
Choose from: Thermal printer
, WIFI printer, USB printer.
Recording
Device If a thermal printer is not configured, you can connect an external
printer. For more about the external printer, see Chapter 7
Printing
an ECG Report
.
Speed Choose from: 1.25 mm/s, 5 mm/s, 6.25 mm/s, 10 mm/s, 12.5
mm/s, 25 mm/s
, and 50 mm/s.
AGC If selected, the gain will be automatically adjusted. The default
setting is Off.
Storage Location Choose from: Local memory
, External SD card.
Gain Setting Choose from: 1.25 mm/mV, 2.5 mm/mV, 5 mm/mV, 10 mm/mV
,
20 mm/mV, 10/5 mm/mV.
Define the channels to be printed in the ECG report.
Report Print
Channel The options are varied depending on the lead mode.
12-lead: 3 Channels, 6 Channels
, 12 Channels, and Customize.
15-lead: 3 Channels, 6 Channels
, 15 Channels, and Customize.
16-lead: 3 Channels, 6 Channels
, 16 Channels, and Customize.
9-lead: 3 Channels, 6 Channels, 9 Channels, and Customize.
18-lead: 3 Channels, 6 Channels, 18 Channels, and Customize.
When you select “Customize”, you can select the leads for 3 or 6
channels.
VCG Calculation If selected, you can get a printout of VCG calculation report in
- 50 -