Use Instructions

iSE Series Electrocardiograph User Manual System Setting
Ward Not selected by default.
Department Selected by default.
Room No. Selected by default.
Request ID Selected by default.
Exam Room Selected by default.
Exam Item Selected by default.
Technician Not selected by default.
Physician Selected by default.
Clinical Diagnosis Not selected by default.
Priority Selected by default.
Medical History Not selected by default.
Height/Weight Choose from: Off
, cm/kg, inch/lb.
BP Choose from: Off
, mmHg, Kpa
Customize You can add what you want to display in the New Patient window.
Barcode Setting Configure the start and end addresses, the male and female codes
and encoding mode, and then tap Save.
NOTE:
If not configured, the results of barcode scanning may be incorrect.
10.3 Print and Storage Setting
Item Description
Print Report Print ECG report after recording. The default setting is Off.
Auto Measure If selected, the system provides you with auto measurements after
ECG recording. The default setting is On.
Auto diagnosis If selected, the system provides you with auto diagnosis after ECG
recording. The default setting is On.
File Format Choose from: SCP, FDA-XML, DICOM (Encapsulated PDF),
DICOM (ECG Waveform), PDF, JPG, BMP, PNG, and TIFF.
Determine the format of ECG files that are transmit to the server. If
not selected, ECG files in DAT format will be transmitted.
NOTE:
- 49 -