Use Instructions

iSE Series Electrocardiograph User Manual System Setting
Chapter 10 System Setting
To set up the iSE system, tap System Setting in the Main Menu. Options underlined are
default settings. In each setting window, you need to tap Save if available to save your
changes.
10.1 Sampling Setting
Item Description
Sampling Mode Choose from: Real-time sampling
or Pre-sampling
Select Pre-sample to initiate the acquisition of ECG data before
you tap . The latest 10 seconds of ECG data will be recorded.
Select Real-time sample to initiate the acquisition of ECG data
after you tap .
Sampling Time Set the duration for real-time acquisition, single-lead or three-lead
rhythm ECG acquisition. Enter a value between 10s and 1,800s.
The default is 10s for real-time acquisition, 60s for single-lead
rhythm and 20s for three-lead rhythm ECG.
NOTE: The pre-sampling time is fixed at 10s.
Intellectual If selected, the electrocardiograph automatically acquires ECGs
Sampling when it detects no poor ECG signals in 5 seconds. The default
setting is Off.
NOTE: This option is applicable to the Auto mode of standard ECG.
If selected, the system automatically opens the ECG Analysis
Enter the
screen when sampling finishes. The default setting is On.
Analysis screen
when sampling
finishes
Preview If selected, the system opens the report preview page when ECG
analysis finishes. The default setting is Off.
Sampling Device Choose from: DE18 or DE12
Lead Mode Choose from:
DE12: Pediatric mode, 12-Lead
DE18: Pediatric mode, 12-Lead, 15-Lead, 16-Lead, 18-Lead
Rhythm Leads Select the leads to be recorded for rhythm strips. The default is lead
II for RHYT1, lead V1 for RHYT2, and lead V5 for RHYT3.
Reverse If selected, the system prompts you if the electrodes are connected
- 47 -