Use Instructions

iSE Series Electrocardiograph User Manual Editing ECGs
QRS (ms) QRS complex duration
Q-T interval / Normalized QT interval
For calculation of QTc, select System Setting > Parameter
QT/QTc (ms)
Setting > QTc Formulas. The default formula is Bazett. You
can change the formula, but this takes effect only for the
ECG analysis done after this change.
P/QRS/T (° )
Axis of P wave, QRS complex, and T wave in the frontal
plane
RV5/SV1 (mV)
Amplitude of R wave of V5 lead/the amplitude of S wave of
V1 lead
RV5+SV1 (mV)
Amplitude of R wave of V5 lead plus the amplitude of S
wave of V1 lead
Amplitude of R wave of V6 lead/ Amplitude of S wave of V2
lead
RV6/SV2 (mV)
This is visible only when enabled.
RR/PP
RR interval / PP interval
This is visible only when enabled.
Editing Diagnosis
To edit auto diagnosis:
1. Tap on the auto diagnosis portion. The Auto Diagnosis window opens.
2. Select the diagnostic statement you want from the list, or manually enter statements
to the textbox. The list allows you to add or delete diagnostic statements.
3. When you exit the analysis screen, select to save your modification or not. You can
also upload the diagnosis to server by tapping “Submit Diagnosis” in the upper right
corner.
6.4 Retrieving Diagnosis
To retrieve diagnosis for an ECG file:
1. Open the ECG File tab.
2. Tap and hold the ECG file you want.
3. Select Sync from the pop-up menu.
4. The diagnosis (if available) is obtained for this ECG file. The ECG is now diagnosed.
6.5 Reviewing Electronic Medical Record
iSE allows you to review the medical records of the patient.
- 42 -