Manualshelf

Use Instructions

ManualsBrandsEDAN INSTRUMENTS ManualsMedical Supplies & EquipmentElectrocardiograph
31323334353637383940
iSE Series Electrocardiograph User Manual Setting Up the Electrocardiograph
1. Slide the top of the iSE screen down. The notification bar is displayed
2. Turn the WLAN on. WIFI paring starts.
3. Select the printer model for paring. Enter the password to activate the printer.
4. Select Print and Storage Setting > Recording Device > External Printer.
5. Select Print via App before you print an ECG.
To connect an external printer with infrastructure WIFI:
1. Slide the top of the iSE screen down. The notification bar is displayed
2. Turn the WLAN on. WIFI paring starts.
3. Select the printer model for paring. Enter the password if available.
4. Select Print and Storage Setting > Recording Device > External Printer.
5. Select Print via WIFI before you print an ECG.
Refer to Chapter 7
Printing an ECG Report
for the recommended APP and WIFI printers.
2.5 Powering the Electrocardiograph
WARNING
If the integrity of the external protective conductor is in doubt, the equipment should be
powered by the battery.
Use the AC-DC power adapter provided by the manufacturer.
The electrocardiograph can run on AC or the battery power.
To power on the electrocardiograph:
When operating on AC power
Make sure that the AC power meets the requirements (refer to A1.4 Power
Supply Specifications) before power-on. Press and hold the On/Off button on the
right side of the electrocardiograph. The power light turns light blue, and the
EDAN logo will be displayed on the LCD screen. The electrocardiograph is ready
for use.
When the battery capacity is low, leave the electrocardiograph connected to AC
power. The battery will be automatically recharged. The power light is red.
When operating on battery power
Press and hold the On/Off button on the right side of the electrocardiograph. The
power light turns deep blue. After the EDAN logo is displayed on the LCD screen,
the electrocardiograph is ready for use.
Because of the consumption during storage and transport, the battery capacity
may not be full. Please recharge the battery before first use. If the battery has
- 26 -