User's Manual

Patient Monitor User Manual Monitoring ECG
- 77 -
8.12 12-Lead ECG Monitoring
8.12.1 Diagnosis Function
If iM80 is equipped with 12 leads monitoring, the device has automatically diagnosis function.
To perform this function, please:
1 Set Lead Type in the ECG Setup menu to 12 Leads and set Display in the ECG Setup
menu to 12 Leads.
2 Select the ECG Analysis shortcut key on the screen.
3 The Diagnosis Review interface is displayed, shown in figure a. And the diagnosis result is
displayed on the interface after approximately 10 seconds, shown in figure b.
Figure a
Figure b