User's Manual

Patient Monitor User Manual Recording
- 140 -
Alarm review recording Enter the Menu > Review > Alarm Review menu, and
select one alarm, then press the
Record button to start
recording. Press the
Record button on the front panel to
stop recording.
Drug calculation titration
recording
Enter the Menu > Common Function > Drug Dose >
Titration menu, then press the Record button to start
recording. Press the
Record button on the front panel to
stop recording.
Hemodynamic Calculation
result recording
Enter the Menu > Common Function > Hemod Dynamics
menu, then press the
Record button to start recording. Press
the
Record button on the front panel to stop recording.
12-lead diagnosis recording Enter the ECG Setup > 12-L Review menu, then press the
Record button to start recording. Press the Record button
on the front panel to stop recording.
C.O. measurement recording Enter the C.O. Option > C.O. Measure menu, then press
the
Record button to start recording. Press the Record
button on the front panel to stop recording.
The recorder will stop recording in the following situations:
 The recording task is finished.
 No paper in the recorder.
 Malfunction stops the recorder from running properly.
NOTE:
You can press the
button on the front panel to stop the currently recording process.
22.5 Recorder Operations and Status Messages
22.5.1 Record Paper Requirement
Only standard thermosensitive record paper can be used: otherwise the recorder may not function,
the recording quality may be poor, and the thermosensitive printhead may be damaged.
22.5.2 Proper Operation
■ When the recorder is working, the record paper goes out steadily. Do not pull the paper
outward with force: otherwise the recorder may be damaged.
■
Do not operate the recorder without record paper.