User's Manual

Patient Monitor User Manual Monitoring IBP
- 102 -
Pressure out of normal range,
fail.
Make sure that you have selected transducer value in IBP
CAL, and then start the calibration. Contact service technician
if necessary.
Pulsate Pressure Calibration Fail Make sure that pressure value shown by hydrargyrum
pressure meter is changeless. Contact service technician if
necessary.
15.10 IBP Alarm
When Alarm Switch is set to On, the physiology alarm occurs if any measurement value of
Systolic pressure, Mean pressure, or Diastolic pressure exceeds alarm limit. Users can adjust the
alarm limit by accessing XX Options (XX stands for the label name) > Setup > SYS Alarm /
MAP Alarm / DIA Alarm.