Use Instructions
Vital Signs Monitor User Manual Networking
- 32 -
Network Type to select e-link. The e-link key supports 6 digits at most, and the default
is 123456.
Active Connection means receiving the measurement data from external TEMP module.
Before connection, in Menu > e-link > Paired Devices, up to 10 paired devices can be
viewed. For the paired devices, user can modify Alias or view MAC address, etc. In the
Available Devices, the available devices can be viewed, and user can select the desired
device to connect.
6. To ensure data security, user can enable the encryption method AES for e-link
communication in User Maintain. It is disabled by default.
After enabled, the password for AES should be set, up to 16 characters, including numbers,
letters or the combination of both. Default password is Edan123456789KEY.
NOTE
1 The supported e-link data transmission format is ER7, which is applicable in 3 system
environments: iOS, Android and Windows.
2 When the monitor is powered off or enters standby mode, e-link is automatically
disconnected and needs to be reconnected next time.
8.4 HL7 Communication
The monitor supports HL7 protocol to upload data.
1. Select Menu > User Maintain, input password > Server.
2. Select Network Type: Wi-Fi or e-link. For more information about HL7 communication,
refer to HL7 Communication Protocol Service Manual.
When network server is connected, user can perform following operations:
Upload data via network
In Review window, user can upload the selected data. Please refer to chapter Save and
Review for uploading operations.
In User Maintain, if the Real-time Upload is turned on (default is on), the saved data can be
uploaded to network in real time.
Inquire for single patient information via network (applicable to Wi-Fi communication
only).
Select Menu > Patient Info to turn on ADT Query (default is on). The patient information
can be directly obtained from network by manually inputting MRN and click search icon
, or by scanning patient barcode.
In ward round mode, user can import patients or refresh patients in batches based on
ADT Query (applicable to Wi-Fi communication only).