Use Instructions

Vital Signs Monitor User Manual Ward Round Mode
- 26 -
6.5 Choose Patient for Measurement
Choose the patient for measurement and the patient information will be displayed in the main
interface. Click shortcut key to enter the window of Select Patient:
All patients are displayed in list. The mini circle on right of patient shows measurement
status by colour. Green means patient has been measured and measurement data has been
saved in Review; Yellow means patient is in measuring; Grey means patient hasnt been
measured or there is no valid data.
To choose patient for current measurement: click one patient to view detailed information,
and click Measure to start current patients measurement.
If new ward round is needed, press icon to refresh the measurement status of all
patients measurement. All patients will return to not measured status.
Click icon to select patients, and the selected patients can be deleted.
If monitor is restarted, it will return to no patient status in main interface and keep the previous
measurement status in Select Patient interface.
6.6 Save and Review
Save ward round record
Click Save in main interface directly to store one group of measurement data. The storage time is
the ward round record time.
Review ward round record
Click Review in main interface directly to pop up Review window in which user can perform
following operations.
1. Multi-selection: click icon on the upper right area to select data and Upload to
the network server, or Export to removable storage device, or Print data, or
Delete the selected data.
Before uploading, the device should be connected with network server. Please refer to chapter
HL7 Communication for details. Data uploaded successfully will be marked with icon .
2. Single selection: click one group of data to view detailed patient information, measurement
data, operator information, filing information, etc.
3. Filter operation: user can Filter the data by All, Uploaded or Not Uploaded. And the data
will be displayed according to the filtering result.
If monitor is powered off, the parameters data in main interface will be cleared and ward round
record will be stored.