Use Instructions

Vital Signs Monitor User Manual Operator Information
- 22 -
Chapter 4 Operator Information
4.1 User Login
Before measurement, user can login first to set the operator information and other user
configurations.
1. User login: Select Menu > Operator or click the shortcut key > manually set First
Name, Last Name and ID, or directly click the barcode scanning icon on the upper right area
to get operator information to login.
2. Barcode setting for user: Refer to chapter Using the Barcode Scanner.
3. Modifying User Maintain password: Access Menu > User Maintain, input password >
Modify User Password, then modify according the prompts > click icon to confirm. If
password is forgotten, please contact the service personnel.
NOTE:
For safety consideration, please change the password periodically, and a combination of
words and numbers is recommended.
4. Filing-time setting: Select Menu > Operator or click the shortcut key > click to
enable System Time (it is enabled by default) and the saved data will be filed according to
the system time of the device. Disable this function and click Filing Time to manually set the
filing time.
User information and filing time can be viewed in Review window after user clicks Save in main
interface.
5. Power-on password setting: Access Menu > User Maintain, input password > click Auto
Login.
When it is enabled, the monitor can directly enter the normal working interface after start-up;
when it is disabled, the password is required to enter the normal working interface after
start-up. User can Modify Login Password (default is 1234, and the password should only be
fixed as 4 digits).