User's Manual

i15 Blood Gas and Chemistry Analysis System User Manual Setup
- 42 -
2) Press Search WIFI, the system will automatically search networks and display
them. If the system displays Lock for the network password, it is necessary to enter
its password to connect the system to it.
3) Press the network you want to connect, and press Connect WIFI.
NOTE:
The selected network should be in the same area network with that of the DMS.
4) Press Return, and the system will return to the System Setup screen.
4.2.3 Date & Language Setup
With this menu you can set the time and date, the date format, and the language the analyzer uses
for displays and printouts.
Follow the instructions below to set the date and language:
1. Press to go to the Date & Language Setup screen.
Figure 4-7 Date & Language Setup Screen
2. On the Date & Language Setup screen, you can:
 Change the time and date of the system.
 Select the date format. There are three formats: MM-DD-YYYY, YYYY-MM-DD and
DD-MM-YYYY. The default is YYYY-MM-DD.
 Select the language for displays and printouts. The options are: Simplified Chinese and
English. The default language is English.
3. Press OK to accept the changes, and the system will return to the System Setup screen.