User's Manual

SE-1010 PC ECG User Manual Configuring the System
- 129 -
9.3.4.2 Modifying a Protocol
1. Select a protocol from the Protocol pull-down list, and then click on the Modify button to
display the Edit Protocol window.
2. Double-click on an option of the phase row to be modified in the protocol list, and the
pull-down list will be displayed. Select a phase and it will be displayed in
the corresponding grid.
3. Double-click on the grid to be modified, input new information, and click on any other grid
to save the information.
4. Right-click on the grid to display the menu , click on Add Stage, and enter
information in the grid.
5. Set the auto printing time of 12-lead ECG reports in the 12-lead ECG Report (First) and
12-lead ECG Report (Repeat) columns.
6. Set the auto BP sampling time in the BP (First) or BP (Repeat) columns.
7. Click on the OK button to confirm, or click on the Cancel button to cancel modifications.