User's Manual

SE-1010 PC ECG User Manual Configuring the System
- 125 -
2. HR Calculation
You can set the HR calculation to one of the 12 standard leads: І, ІІ, ІІІ, aVR, aVL, aVF, V1, V2,
V3, V4, V5, or V6.
3. HR Analysis Lead
You can set the HR Analysis Lead to one of the 12 standard leads: І, ІІ, ІІІ, aVR, aVL, aVF, V1,
V2, V3, V4, V5, or V6.
9.2.4 Selecting Auto Printing When Detecting Arrhythmia
When Auto printing when arrhythmia is selected, if Arrhythmia ECG data, including
Ventricular Tachycardia, 5>PVCS>=3, Paired PVCS, Bigeminy, Trigeminy, R ON T, single PVC
and Missed Beat, is detected during the sampling course, printing will be triggered automatically.
9.2.5 Setting Background Grid
Select Background Grid, the grid on the background of the ECG sampling screen will be
displayed.
Deselect Background Grid, the grid on the background of the ECG sampling screen will not be
displayed.
9.2.6 Setting Anti-aliasing
Select Anti-aliasing, the system will automatically make the waveform smooth.
Deselect Anti-aliasing, the system will not make the waveform smooth.
9.2.7 Selecting QRS Voice
If you select QRS Voice, there will be a beep when an R wave is detected.
9.2.8 Selecting Sequence Mode When Sampling
When Sequence Mode When Sampling is selected, groups of waves will be displayed in
succession.