User's Manual

SE-1010 PC ECG User Manual Configuring the System
- 122 -
NOTE: Click on the New Patient button on the main screen to open the Patient
Information window as the above figure shows.
Select Memory in Basic Information window, the content of User-Defined 1 in the Patient
Information window will be saved. For example, when you enter None in the Allergies textbox
of picture (a), and enter None in the Other textbox of picture (b), click OK and open the Patient
Information window again, you will find that None is in Allergies textbox and the Other
textbox is empty. If Memory is not selected, the Allergies textbox and the Other textbox are all
empty.
9.1.2 Setting ID Mode
Set ID Create Type to Automatically, Manually or Accumulatively.
When ID Create Type is set to Automatically, the patient ID can be automatically generated
according to the examination date.
When ID Create Type is set to Manually, you should enter the patient ID manually in the
Patient Information window.
When ID Create Type is set to Accumulatively, the patient ID can be increased by one
automatically. You need to set the format and the starting number for ID.
9.1.3 Setting Language
You can set the language to Chinese or English.
NOTE: To validate the language setup, after setting, you should restart the system.
9.1.4 Specifying the Storage Path of the ECG Data
Click on the Browse button in the Basic Information window (Figure 9-1) to assign the storage
path.