User's Manual

SE-1010 PC ECG User Manual Operation Instructions for Exercise ECG
- 100 -
7. Click on the Keep button and the system enters the Keep state. The hint Keep will be
displayed in the speed/power field. The Next button becomes unavailable. In this state, the
system will not follow the previous settings to change the speed and grade of the treadmill,
but keep the current speed and grade until this button is pressed again.
7.7 Recovery Phase
1. When the current heart rate exceeds the target heart rate, click on the Recovery button to
enter the recovery phase. Or, the system will enter the recovery phase automatically after the
set exercise test time is over.
2. View the heart rate and BP of the patient. For details, please refer to Section 7.5.1, “Viewing
the Heart Rate and the Blood Pressure”.
3. View other information. For details, please refer to Section 7.5.2, “Viewing Other
Information”.
4. Edit the waveform. For details, please refer to Section 7.5.3, “Editing the Waveform”.
5. Click on the Print button to print the recovery report.
6. The system will enter the next stage of the recovery phase automatically after the set time of
this stage is over. Or, click on the Recovery button or click on the Next button to enter the
next stage of the recovery phase manually.
7.8 Exiting the Exercise Test
During the exercise test, click on the STOP button to display the following dialog box. Enter the
reasons for termination in the dialog box or select a reason from the pull-down list. Then click on
the OK button to open the analysis screen. The reason for termination will be displayed in the
summary report.