User's Manual

SE-1010 PC ECG User Manual Operation Instructions for Exercise ECG
- 99 -
4. Click on the ST Trend button to display the ST trend. Right-click on the ST trend field to
display the lead group menu, and then you can select other leads.
7.5.4 Printing the Pretest Report
1. The pretest report will be printed automatically 14 seconds after the beginning of the pretest
phase.
2. Or, you can click on the Print button to print the pretest report.
7.6 Exercise Phase
1. Instruct the patient to use the treadmill/ergometer. Then click on the Exercise button to enter
the exercise phase. Or, the system will enter the exercise phase automatically after reaching
the set pretest time.
2. View the heart rate and BP of the patient. For details, please refer to Section 7.5.1, “Viewing
the Heart Rate and the Blood Pressure”.
NOTE: When the current heart rate exceeds the target heart rate, click on the
Recovery button to enter the recovery phase and observe the waveforms.
3. View other information. For details, please refer to Section 7.5.2, “Viewing Other
Information”.
4. Edit the waveform. For details, please refer to Section 7.5.3, “Editing the Waveform”.
5. Click on the Print button to print the exercise report.
6. The system will enter the next stage of the exercise phase automatically after the set time of
this stage is over. Or, click on the Exercise or Next button to enter the next stage of the
exercise phase manually.