User's Manual

SE-1010 PC ECG User Manual Operation Instructions for Exercise ECG
- 93 -
7.2.5 Setting BP Sampling Mode
Select a BP sampling mode from the BP sampling mode list.
7.2.6 Setting BP Triggering Mode
You can set the BP triggering mode to Square wave or QRS in the
Exercise ECG Setting window.
7.2.7 Setting Auto Printing
Select Auto print to print ECG reports automatically.
7.3 Entering New Patient Information
If the patient is a new one,
1. Click on the New Patient button on the main screen (Figure 6-1) to display
the Patient Information window, and then enter the patient information. The operation steps
are the same as those of resting ECG. For details, refer to Section 6.3, “Entering New Patient
Information”.
NOTE:
1. Patient ID and age must be entered.
2. Please enter the correct patient age which has direct relationship with the calculation
of the target heart rate.