User's Manual

Acclarix AX8 Diagnostic Ultrasound System User Manual System Setup
- 92 -
Figure 8-10 Bodymarker Preset
Deleting a Bodymarker from a Preset:
If the selected bodymarker is from a user-defined which does not point to any exam preset, you
can delete it with the Delete button.
If the selected bodymarker is from a user-defined which points to an exam preset, or the selected
bodymarker is from a default preset, the Delete button will be unavailable.
1. Select a bodymarker from pre-defined graphics area.
2. Press Delete on the touch screen.
Moving a Bodymarker in Pre-Defined Graphics Area:
1. Move the cursor over a bodymarker in pre-defined graphics area and click Enter.
A green box displays outside of the bodymarker.
2. Move the trackpad to a desired position and click Enter. To move it to another page, move
the trackpad over page up or down icons.
Set a Default Bodymarker for a Preset:
Select a bodymarker from pre-defined graphics area and click Default, the bodymarker is set
as a default bodymarker to select preset.
The default bodymarker can not be deleted from a preset until another bodymarker is selected
as a default one.
General Settings:
 Auto-erase bodymarker when the image is unfrozen: If this option is enabled, the
bodymarkers will be erased when the image is unfrozen, otherwise the bodymarkers will
only be erased on demand or at the start of a new exam.
 Suppress Body Mark on Unfreeze: If this option is enabled the bodymarkers function
goes away when the system is unfrozen, and comes back again with the next freeze.
Manually exiting the function causes it to remain inactive until manually activated.
Pre-defined
graphics area