User's Manual

Acclarix AX8 Diagnostic Ultrasound System User Manual Features
- 79 -
圆锥台
矩形卡槽
旋钮2
螺钉
旋钮1
Figure 7-12 Structure of Needle Guide Bracket Kit
Step 2: Select the correct size guide for the gauge of needle to be used, and secure it to the needle
guide holder by tightening knob 1. If the needle guide holder is loose tighten the screw with an
allen wrench. Loosen knob 2 all the way prior to installing the bracket on the transducer.
Step 3: The transducer has a small circular dimple on one side of the transducer, and a rectangular
ridge on the other side. Place the needle guide bracket over the transducer such that knob 2
tightens into the circular dimple and the ridge sits inside the corresponding slot on the bracket.
(see figures 7-13 through 7-16).
一字形凸起
凹槽
Figure 7-13 Convex slot of Probe Figure 7-14 Notch of Probe
Knob 1
Rectangular slot
Knob 2
Cone
Screw
Convex
Notch