User's Manual

Acclarix AX8 Diagnostic Ultrasound System User Manual Features
- 75 -
Select the export path from destination drop list menu and click
OK to confirm. If there is only one removable media then this field
is a read-only field. Static images export as .bmp files. Clip
images export as .avi files.
While export in progress the dialog is displayed as bellow. Cancel
button is used to stop the export. The dialog disappears when
export finishes.
If there is no USB plugged in, the message “The images cannot
be exported because no USB flash drive is inserted” is displayed
and no export work to do.
Exit
Exit review function
Table 7-3 Review Touch Screen Controls
Select Set:
By default, Review displays all Static and Clip images stored for the current exam in the order
they were stored. Images can be placed into the Select Set by highlighting them and pressing the
Select key on the touchscreen. Pressing the Show Selected button will then display the selected
images in the order they were selected.
Reviewing Clips:
By default stored clips playback at half speed. You can adjust the playback rate Review will show
Static and Clip images intermixed in the order they were stored.
Exiting Review:
In review state, press Review or B hard key on the control panel, or press the Exit button on the
touch screen to exit the review function.
Measurement in Review State:
Measurements in review state are supported for the current exam (including restarted). Review a
clip or static image for current active exam (please pause the clip when a desired image is got)
and then press Measure hardkey on the console to start measurements.
Note:
1) PISA, Auto IMT and Auto Trace measurements are disabled in review state.
2) Measurements on stored panorama image are not available in review state.
7.4.3. Patient Database
The Patient Database provides a list of recently performed studies. It can be accessed by pressing
the Review hard key on the console when there is no active exam. Figure 7-10 shows an example