User's Manual

Acclarix AX8 Diagnostic Ultrasound System User Manual Features
- 62 -
Figure 7-4 Tool Options Touch Screen
Moving the measurement result window
The measurement result window is displayed on the top left corner of the image field by default,
the system supports changing the display position of the result window by dragging it.
To change the display position of result window:
1. Press Cursor hard key to invoke a cursor after a measurement is done.
2. Move the cursor over the result window, and press Set key, the result window will turn
green.
3. Move on the track pad to locate a desired position within the image field for the result
window.
4. Press Set key again to fix the result window on the new position.
The system supports a different result window position for each image mode.
Note:
The measurement result window cannot be moved when measure in review state.