User's Manual

Acclarix AX8 Diagnostic Ultrasound System User Manual Features
- 60 -
Figure 7-2 Body Mark Touch Screen
Button
Description
Delete
Delete the graphics on the image area
Angle
Rotates the transducer icon on the bodymarker graphic.
Table 7-2 Body Mark Touch Screen Description
Adding a body mark:
1. Invoke the Body Mark function
The default bodymarker graphic appears on the main screen, with the transducer icon shown
in the default position.
2. Select a desired bodymarker graphic on the touch screen, that graphic replaces the default.
3. Move the transducer icon as needed. The orientation of the transducer icon can be changed
with the Angle touch screen key.
Moving the transducer icon:
1. Press Probe/Graphic to toggle moving the transducer icon.
The transducer icon can not be moved outside of the bodymarker graphic area.
2. Press Probe/Graphic to confirm the new position of the transducer icon and toggle moving
the bodymarker graphic.
Probe/Graphic button can be used to toggle between moving the transducer icon and moving
the bodymarker graphic. The selected button is yellow colorized in the background.
Deleting a body mark:
There are two ways of deleting a bodymarker graphic:
 Press Delete on the touch screen to delete the graphics on the image area.
 Press the Clear hard key to delete all bodymarkers, comments, and measurements.
7.3 Measurements
NOTE: This section provides general introduction of generic and application
measurements. For details about specific application measurements and calculations,
please refer to the Acclarix AX8 Advanced Manual.