User's Manual
Acclarix AX8 Diagnostic Ultrasound System User Manual Transducer
- 54 -
6.2 Name and Function of Each Part of the Transducer
Figure 6-1 shows an example of a transducer.
Figure 6-1 Typical transducer
Name
Function
Transducer head
Converts electrical signals to sound waves, and then converts received echoes
back to electrical signals. The tip of the transducer is the acoustic lens.
Transducer cable
Transmits electrical signals between the transducer head and the transducer
connector.
Transducer
connector
Connects the transducer to the ultrasonic diagnostic system
6.3 Transducer Cleaning and Disinfecting
Transducers should be cleaned and/or disinfected as necessary or between use with a
recommended cleanser or disinfectant. Disconnect the transducer from the system prior to
cleaning and disinfecting.
The validated cleaning agents for cleaning the transducers are:
Mild near neutral detergent
Ethanol (75%)
Isopropanol (70%)
Cleaning agents should be applied and removed using a clean, soft, non-abrasive cloth or paper
towel.
The validated disinfectants for transducer are:
Ethanol (75%)
Transducer head
Transducer connector
Transducer cable