User's Manual

Acclarix AX8 Diagnostic Ultrasound System User Manual Imaging
- 48 -
y-axis.
VOI
Press to activate the function of adjusting VOI or clip
plane. Use the trackpad to adjust and press Set to switch
between VOI and clip plane.
Cut
Function of cut. After activating this button, the 3D image is
selected, press Set to locate the start point, use trackpad
to trace and second press Set to locate the end point The
region within these two points will be cut. The system will
draw a straight line between the start and end point to
enclose the cut region.
Undo
Undo the previous cut operation
Redo
Redo the previous undo operation
Undo All
Return to the condition before cutting
Threshold
Adjust the threshold of surface render mode, Upward
presses increase threshold. Downward presses decrease
threshold.
Bright.
Adjust the bright of 3D image
Contrast
Adjust the contrast of 3D image.
3D
Smooth/
MPR
Smooth
Adjust smoothness of A\B\C slices and 3D images. Higher
filter levels create a smoother image. Upward presses
increase the filter. Downward presses decrease the filter.
Rotation
Quickly rotate the image. Available angles are: 0°/90°
/180 °/270° .