User's Manual

Acclarix AX8 Diagnostic Ultrasound System User Manual Imaging
- 46 -
Table 5-7 Pre-3D Touch Screen
5.6.2. 3D Volume Sweeping
During the process of 3D volume sweeping, the images swept in ROI box are displayed in the
image area.
Figure 5-3 3D Image Scanning
While scanning, the sector in the right bottom is filled gradually，and no buttons on the
control panel and touch screen can be activated.
5.6.3. 3D Image Review
If 3D was selected, then the system will enter to the 3D review status after finishing one sweep.
automatically.
3D/4D
These two radio buttons determine if the acquisition will be
3D or 4D.
Start
Start an acquisition. If 3D was highlighted then a single
volume is acquired. If 4D was highlighted then continuous
acquisitions are started.
Exit
Exit 3D/4D