User's Manual

Acclarix AX8 Diagnostic Ultrasound System User Manual Getting Started
- 17 -
3.5 Powering on/ off
Please review and follow the steps described in the Section 12.1.Daily Checklist prior to
powering on the device.
 To power on:
1. Connect the system to a hospital grade power supply, or use the battery as the power supply.
2. Press the power on/off key on the top left of control panel.
 To Login
If Password Protection is enabled (see section 9.1.5), the system displays a Login dialog
when booting up the system, you can type in or select user name in the drop-down list of
User name, then enter password and click Login.
For emergency use, you can click on Emergency to log on directly without entering user
name and password.
Note:
When both Admin1 and Admin2 password are forgotten, please contact the
serviceman for the system password reset.
 To power off:
1. Press the power on/off key on the top left of control panel and the system displays a
confirmation dialog box.
2. Select “Shut Down” from the confirmation dialog box.
If the system is unresponsive, a long press of the power on/off key will shut down the system
directly.
NOTE:
Please unplug the AC adapter from the power socket and disconnect the battery prior to
storage.
 Sleep mode
The system will enter a sleep mode that maintains exam information while using minimal battery.
There are three events that can invoke sleep mode: