User's Manual

Acclarix AX8 Diagnostic Ultrasound System User Manual System Setup
- 96 -
 Logo Position: set the logo position to locating at the left or right side of report header.
 Logo Size: set the logo size to Small or Large.
 OB Settings
The system supports the following OB measurement settings:
 Fetal Age: select the author / measurement options for Fetal age calculation.
 Fetal Growth: select the author / measurement options for Fetal Growth calculation.
 Estimated Fetus Weight: select an equation for the Estimated Fetus Weight calculation.
 Growth Curves Display: set single or quad curves as the default display format for the
Growth Curves.
 Default GA display: set the CUA (Composite Ultrasound Age) or AUA (Average
Ultrasound Age) as a default result displayed in the worksheet.
 Cardiac Settings
The system supports following Cardiac measurement settings:
 HR Cycle: set the number of heartbeats that are assumed in the HR or FHR
measurement calculation. Range: 1-8.
 EDV/ESV: set the author of the formula that is used in EDV/ESV calculation. There are
three options: Teichholz, Gibson and Cube.
 Suppress Measurement on Unfreeze If this option is enabled the Measure function goes
away when the system is unfrozen, and comes back again with the next freeze. Manually
exiting the function causes it to remain inactive until manually activated.