Specifications
6 / 13
o Server disconnected
➢ Support below two methods
o In transparent mode, through GPIO to connect LEDs, LED On –connected, LED Off
disconnected, LED Flashing –connecting.
o Report the connection status to customer Host through Alinket ACM command.
2.7 Multi-Socket of TCP/UDP
Max.4 TCP sockets + 4 UDP sockets supported to connect to different networks. Those
connections can be used for either of below two types of services or mixed circumstances.
➢ To connect to different servers for various cloud services.
➢ To connect to same server or cloud for different services such as system, event, control and
service.
The figure below describes the use of the multi-socket TCP or UDP connections.
Figure 3 Multi-Socket Connections for TCP/UDP
2.8 Low Power Mode
ALX85X family supports low power mode to meet various industry and applications. The typical
implementation is to use two GPIOs.
➢ 1
st
GPIO for enter/quit low power mode
➢ 2
nd
GPIO to indicate the status, normal or low power mode.
2.9 Fast Network Configuration –Flashlink
Flashlink is a fast network configuration tool especially for those ALX85Xcustomer devices which
without an UI display. It is an APP software which can be installed on mobile phone or PAD.
Flashlink can help customer to configure below network parameters.