User's Manual
User’s Manual
Medi-View User Manual 21
3.3 Installation of HDD, SSD (optional)
CAUTION: The installation of the optional HDD and/or SSD drive should be carried out by a
professional technician. Only UL-certified hard disks may be installed!
Please contact a service technician or your reseller if you need this service.
3.4 Running the BIOS setup program
BIOS
setup
Your Medi-View is likely to have been properly set up and configured by your dealer prior to delivery. If you
still find it necessary to use the BIOS (Basic Input-Output System) setup program to change system
configuration information please contact Remedi for support.
The settings you specify with the setup program are recorded in a special area of memory called CMOS RAM.
This memory is backed up by a battery so that it will not be erased when you turn off or reset the system.
Whenever you turn on the power, the system reads the settings stored in CMOS RAM and
compares
them to the
equipment
check
conducted
during the power on
self-test (POST).
If an error occurs, an error message will be
displayed on screen, and you will be prompted to run the setup program.
3.5 Installing system software
Setup and installation
instructions
Recent releases of operating systems from major vendors include setup programs which load automati- cally
and guide you through hard disk preparation and operating system installation. The guidelines below will help you
determine the steps necessary to install your operating system on the Medi-View. If required, insert your
operating system’s installation or setup disc into a portable optical drive and plug into one of the Medi-View USB
ports.
Some distributors and system integrators may have already pre-installed system soft- ware prior to
shipment of your Medi-View.
If you are presented with a setup/installation screen then carefully follow the instructions. The setup pro- gram
will guide you through preparation of your hard drive, and installation of the operating system.
3.6 Installing the drivers
Drivers
After installing the system software, you will be able to install the necessary drivers. All the Medi-View
drivers and updates can be obtained from Remedi.
The drivers and utilities used for the Medi-View are subject to change without notice. If in
doubt, check with your local Remedi office or contact our application engineers for the latest
information regarding drivers and utilities.