User's Manual

Medi-View User Manual
20 Medi-View User Manual
Disclaimer
The installation instructions in this manual should only be used as a guideline and represent a standard
installation. It is the responsibility of the Customer, or the appointed Customer’s sub-contractor, to ensure that FX
Ergonomics products are installed in direct relevance to the specification required at installation site, and that
adequate engineering consultation has been made to ensure correct installation and operation. In no event will
Remedi Technology Ltd, and its suppliers and sub-contractors be liable for any, indirect, incidental, special or
consequential damages arising from poor or incorrect installation and failure to carry out certified engineering
consultations.
3.2 Booting up the Medi-View
Image 4 -1
Connecting the power cable
Connect the male plug of the power supply to an electrical outlet.
Connecting USB keyboard and mouse
Connect the keyboard and mouse to the USB ports located on the bottom cover of the Medi-View, see
Figure below and connector 1 in image 2-6.
Image 4 -2
Connecting the keyboard and mouse
Switching on the power
Switch on the Medi-View via the power switch on the front cover (See figure below).
已註解 [W3]: 要加上 file number